Collection: Emergency Brake Cables & Economy Kits

EMERGENCY BRAKE CABLES FOR ALL APPLICATIONS AND ECONOMY KIT!

THERE IS AN EXTRA CHARGE FOR THIS CABLE ON ALL KITS

We no longer stock the emergency brake cable for use with the TURNER BRAKE rear disc interchange kit. IF you are installing this kit on anything other than an Avanti, you will need to measure the difference in the stock emergency brake cable and determine what the correct length needs to be. Usually, it will need to be shortened, both in total length and the spring at the end of the cable.

You need to take the correct measurements, fill out the following form, and mail it back to TURNER BRAKE. We will forward that measurement that YOU provide to our manufacturer, who will then drop ship the cable back to you.

IF YOU SEND AN INCORRECT MEASUREMENT, WE WILL NOT SEND ANOTHER CABLE! ONLY ONE CABLE WILL BE INCLUDED IN EACH KIT! IF YOU HAVE ANY QUESTIONS ABOUT THIS, PLEASE CONTACT US BEFORE YOU SEND IN THE MEASUREMENTS FOR THE CABLE!

We understand this is a slight inconvenience, but, in trying to accommodate as many different vehicles as possible, we have set this up with our vendor. We expect turn around time of approximately 2 weeks.

TURNER BRAKE STUDEBAKER & AVANTI REAR DISC BRAKE KIT PARTS LIST

  • 84-90 LINCOLN MARK SERIES ROTORS
  • AIMCO # 5453, WAGNER # 141752 (2)
  • 79-81 CADILLAC SEVILLE CALIPERS LEFT/RIGHT
  • AUTOLINE 40-4172 - 40-4173 OR
  • OEM REBUILD # 18-4138H- 18-4139H 1 EACH
  • WHEEL STUDS DOORMAN 610-085 (10)
  • Hose’s WAGNER # BH38160 (2)
  • BANJO BOLTS NAPA # 82703 (2)
  • CALIPER MOUNT PINS H5004 (4)
  • PADS MDK -154

No products found
Use fewer filters or remove all

Important Installation Instructions

To ensure the safe and proper installation of your kits and parts, it is crucial to review the detailed instructions provided. Please take the time to read through the instructions thoroughly before beginning the installation process.